Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
0.6–0.8s High-Speed Servo Barrier Gate BS-DZ155-HD02H
0.6–0.8s servo barrier gate with a carbon-fiber boom up to 3m, obstacle protection and ANPR/RFID integration for frequent-traffic vehicle access projects.
Description
High-Speed Servo Barrier Gate for Frequent-Traffic Lanes
The Baisen Access BS-DZ155-HD02H is a high-speed automatic barrier gate designed for parking entrances, toll-style lanes, factories, logistics facilities and restricted vehicle access points where fast opening and stable positioning are important. Its servo motor, Hall sensors and encoder support accurate limit control, while the lightweight carbon-fiber round arm is configured for a maximum length of 3 meters.
Key Project Benefits
- 0.6–0.8 second operation: suitable for controlled high-frequency vehicle lanes.
- Servo positioning: Hall sensors and an encoder support stable opening and closing limits.
- Carbon-fiber arm: a lightweight round boom helps reduce moving mass.
- Obstacle protection: supports return while closing and stop protection while opening.
- Safety-device integration: infrared and radar sensors can be matched according to the lane design.
- Multiple control methods: remote control, push button and computer control can be configured.
Technical Specifications
| Model | BS-DZ155-HD02H |
|---|---|
| Motor | Servo motor |
| Motor power | 250W |
| Input voltage | 220VAC 50Hz or 110VAC 60Hz |
| Output voltage | 36VDC ±5% |
| Opening/closing speed | 0.6–0.8 seconds |
| Maximum boom length | Up to 3m |
| Boom type | Carbon-fiber round arm, Ø38mm |
| Operating temperature | -35°C to +70°C |
Typical Applications
Commercial parking entrances, office parks, factories, logistics centers, campuses, residential compounds and access lanes that require short booms and faster vehicle throughput.
System Integration and Safety Planning
The barrier can be connected with ANPR/LPR cameras, RFID readers, access controllers and parking management equipment. Barrier speed must not replace lane safety design. Define vehicle detection, obstacle protection, passage confirmation and delayed closing according to the project layout. A loop detector, radar sensor or infrared photocell may be required.
Information Required for Model Selection
- Clear lane width and required boom length
- Expected vehicles per hour and required opening speed
- Local power supply and operating environment
- ANPR, RFID or third-party control interface
- Required loop detector, radar or photocell protection
- Project country, lane quantity and delivery destination
OEM/ODM and Wholesale Support
Baisen Access supplies barrier gates from China for overseas distributors, installers and project buyers. Branding, housing configuration, control interfaces, accessory matching and shipment requirements can be discussed according to model and quantity.
Frequently Asked Questions
Can this model use a 6-meter boom?
No. The published configuration lists a maximum boom length of 3 meters. For wider lanes, select a slower barrier designed for a longer arm.
Can it connect to an ANPR parking system?
It can be configured with computer or controller-based opening commands. Send the required protocol, relay logic and lane sequence so integration can be reviewed.
What safety equipment should be ordered?
The correct combination depends on the lane layout. Provide the vehicle direction, boom position and closing sequence so loop detectors, radar or infrared devices can be matched.
Read the automatic barrier gate buying guide and our OEM/ODM and quality-control process.
Need a high-speed barrier gate quotation? Contact Baisen Access with your lane width, speed and safety requirements.
