Description

Product Name: 22TD Top-Mounted DC Electric Lifting Column

Features
● Warning Light: A warning light strip is installed on the top of the column. The light strip flashes when the column is raised or lowered, and the warning light is clearly visible when the column is in the rising or falling state;
● Raising Speed: 150mm/s;
● Warning Marking: 5CM reflective strip with nighttime warning function;
● Installation Environment: Can be arranged according to the installation environment and site geological conditions;
● Pressure Resistance: 50-ton container truck pressure;
● Height in Dark State after Raising: 600mm (±2mm);
● Operating Method: Manual and remote control;
● Operating Temperature: -20℃~55℃ (When the product is used below 0℃, asynchronous raising and lowering is normal);
● Power-Off Raising Mode: In case of power failure, the column can be raised and lowered manually or using a backup power supply;
● Raising Performance: The raising column can continuously raise and lower 5000 times without failure and operates smoothly.
● Water immersion performance: After the main body of the lifting column is immersed in water for ≥72 hours, there is no leakage and it can still be raised and lowered normally;
● Control system: The dielectric strength, insulation resistance and discharge current of the control system comply with the provisions of Clause 5.7 of GA/T 1343-2016.

Technical Parameters
: Column Parameters:
● Power Supply: DC36V
● Drive Method: Mechatronics
● Operating Temperature: -30℃~55℃
● Protection Rating: IP68
● Operating Speed: 4S
● Emergency Mode: Manual Lifting/Battery Lifting (Optional)
● Maximum Thrust: 100Kg
● Column Height: 600mm (Customizable)
● Column Diameter: 220mm (Customizable)
● Column Wall Thickness: 6, 8, 10mm
● Column Material: 304 Stainless Steel Tube
● Base Box Material: Q235
● Protection: Acetone + Spray Coating
● Maximum Through Pressure: 50T
● Reflective Warning Light: 3M Reflective Film (50mm Wide)
● Warning Light: LED Bead Marking (Standard), Anti-collision Rubber + LED Light Strip (Optional)
Enclosure Parameters:
● Input Power: AC 220V
● Output: DC36V
● Operating Temperature: -30℃~55℃
● Protection Rating: IP54
● Remote control distance: ≥50 meters
● Number of devices controlled: Single-to-two/Single-to-four/Single-to-six
● Control methods: Light control/Manual button control/Remote control
● System interfaces: Ground loop coil, infrared sensor, TCP/IP interface

Automatic Rising Bollard for Vehicle Access Projects

The BS-SD602RP is a top-mounted DC electric rising bollard for controlled vehicle entrances. Its 36V mechatronic drive, IP68 protection rating, 304 stainless steel column and manual or optional battery emergency lifting options make it suitable for overseas security contractors, distributors and system integrators planning frequent-access lanes.

Typical Applications

Government and public facilities, industrial parks, logistics centers, residential compounds, commercial buildings, schools and other entrances that require controlled vehicle passage and visible warning during operation.

Project Selection Checklist

Confirm the number and clear width of vehicle lanes.
Provide the installation foundation, underground space and drainage conditions.
Confirm local input voltage, daily operating frequency and emergency operation method.
Specify ANPR, RFID, remote control, guard station or centralized controller integration.
Confirm the required column height, diameter, wall thickness and warning configuration.

Wholesale and OEM/ODM Support

Baisen Access supplies rising bollards for distributors and project orders. Model configuration, control cabinet, warning equipment, accessories, labels and branding requirements can be discussed according to the selected specification and quantity. For a project quotation, send the installation drawing, lane quantity, destination country, voltage, control method and delivery requirement.

Frequently Asked Questions

Can this bollard connect to ANPR or RFID access control?

Yes. The control solution can be planned for ANPR cameras, RFID readers, push buttons, remote controls or centralized access controllers. Confirm the required signals before ordering.