Description

24V Flap Barrier Turnstile BS-YZ-Es

BS-YZ-Es is a pedestrian flap barrier for controlled entrance projects. It supports dry-contact access signals and can be evaluated for card-reader, access-control and visitor-management integrations after the interface and lane requirements are confirmed.

Functional Features

Fault self-check and alarm prompts support operation and maintenance.
Configurable access modes for controlled entry and exit.
Locking response when no valid opening signal is received.
Audio-visual alarm functions for abnormal access conditions.
Infrared detection supports anti-pinch logic during gate reset.
Automatic reset can cancel an unused access permission after the configured time.
The barrier arm can be pushed open during power interruption; the project designer must verify this behavior against local emergency-egress requirements.

Technical Parameters

Input voltage	AC 100–240V
Drive voltage	24V
Equipment power	30W
Response time	0.2 seconds
Passage rate	Up to 50 persons/min in normally-open mode; 35 persons/min in normally-closed mode
Opening signal	Dry contact
Opening/closing time	Less than 1 second
Overall dimensions	1200 × 280 × 980 mm

Typical Applications

Office and commercial-building entrances
Schools, campuses and institutional access points
Transit, venue and visitor-management lanes subject to project design

Project Selection Checklist

Confirm clear passage width, lane quantity and expected traffic flow.
Specify card, QR, biometric or visitor-system interfaces.
Review infrared safety logic and emergency-egress behavior with the system integrator.
Confirm cabinet finish, installation environment, direction indicators and power supply.
Provide floor plan, quantity and destination country for configuration review.

Request a Quotation

Send lane width, expected pedestrian flow, access-control interface, reader type, quantity and delivery country. Read the pedestrian turnstile buying guide or contact Baisen Access for project review.